A common size and kind of elevator

A common size and kind of elevator
For user just contact lifting equipment, elevator is variety, bucket elevator, chain hoist, plate chain; Combined with TH, TD, NE the model code letters, see a person dazzling, too many things to see, simply do not know how to start to choose suitable hoist.


Ascension vendors would use of xinxiang as a professional elevator design manufacturers, simply summarizes several common elevator, hoping to help users understand lifting equipment, specific as follows:


one Bucket elevator


Bucket elevator is a fixture of mechanical transmission equipment, mainly suitable for powder, granular and small pieces of material vertical rising continuously, can be widely used in all kinds of the size of the feed mills, flour mills, rice, oil, starch factory and grain depot, port terminals and other bulk materials.



Second, the HL type chain bucket elevator


The HL type chain bucket elevator, by moving parts (hopper and traction chain), with the upper section of the sprocket, with the lower part of the tensioning wheel section, the intermediate casing, driving device, non-return braking device, etc. The hoist hopper for layout, intermittent loading by determining the "tao", the "centrifugal feeding method" discharge. This elevator traction institutions are two circular chain.


Three, NE series plate chain hoist


NE series plate chain bucket elevator machine system into the type of feeding, material into the hopper by plate chain ascend to the top, in the material under the action of gravity discharge itself. This series hoist specification (a total of 11 NE15 ~ NE800) more wide lifting capacity; And can produce high, low energy consumption, can gradually take the place of other type hoist, its main parameters, see the table below. This drill adopts full casing chain sealing speed is low, almost no back to the material, so the reactive power loss, low noise, long service life.

Four, the vertical vibration of elevator


Vertical vibration of elevator is made improvement slot, vibration motor, vibration isolation system and the base, etc. This series of hoist is the vibration motor as vibration source, on the improvement slot with two sets of the same type of the center line of the cross Angle vibration motor installation, and do the opposite direction from the synchronous rotation, vibration motor with eccentric block rotates at every instant position of the centrifugal force generated by the component along the casting direction for reciprocating motion, make the bearing on the shock absorber of whole body vibration, the material being thrown up in the improvement slot upward movement at the same time, the material fall into the trough, start being thrown up, this time can make a good contact with raw material and air, also can have the effect of thermal cooling. The elevator to the powder, block and short fibers of solid materials (except for a viscous and caked) can be vertical transmission, also can complete drying, cooling effect of the material. Open type, closed two structures. And we can special design according to user needs.